Avermedia NV 5000 Manuel d'utilisateur télécharger pdf (Page 6)

1.1 Upgrade the BASIC mode to ADVANCED mode

The CM3000 has two operating modes – Basic and Advanced mode. In Basic mode, users only can

monitor 16 remote DVR servers. With the Advanced mode, users can monitor up to 1000 remote DVR

servers.

Please follow the below steps to upgrade the CM3000 from Basic mode to Advanced mode.

1. Call your local distributor and purchase a copy of the ADVANCED license or download the BASIC

mode from the Internet.

2. Your local distributor will then issue you with a Password. (If you have purchased the ADVANCED

mode CD, this password is located on the CD sleeve itself).

3. The Password is only valid for one time and is tied to the PC hardware. Do not release the

password to any third party.

4. Run the CM3000 program.

5. Click the exit button 'x' on the upper right corner of the CM3000 main screen.

6. Click About →Register (also see 3.2 # 1

)

7. On the Register dialog box, note down the Activation number. Send both the Activation number

and Password to your distributor.

8. Your distributor will then issue you with a Serial Key, which is tied to Activation number.

9. Go back to the Register screen and fill in the serial number from the distributor to upgrade the

CM3000 to ADVANCED mode.

The BASIC mode and ADVANCED mode only differs in the number of DVR servers that

can be monitored at the same time. You have the same functionalities on both products.

1.2 Dual Monitors setting

Video configuration is different for each different VGA chipsets. Please follow the steps below to

setup the dual monitors display.

1.2.1 Graphic card with ATi chipset

1. Enter the ATI Catalyst Control Center, user can click the short-cut or right click on the screen.

2. There are two modes to select ─ Basic and Advanced.

1 2 3 4 5 6 7 8 9 10 11 ... 74 75

Pas de commentaire

Avermedia NV 5000 Manuel d'utilisateur Page 6