Avermedia AVerDiGi EB3004 MD Guide d'installation télécharger pdf (Page 2)

Hardware Installation

A. Install the hard disk

Follow the steps to install the hard disk:

1. Loosen all screws

2. Push the cover backward and lift

3. Secure the brackets on the hard disk

4. Connect the end of the SATA cable and the

power connector to the hard disk

5. Secure the hard disk inside the unit then

replace unit cover

6. Push the cover forward and secure the cover

7. You may now connect all the cables. When the power is connected, the Power LED light

turns on

1 2 3 4 5 6 7 8

Pas de commentaire

Avermedia AVerDiGi EB3004 MD Guide d'installation Page 2