Avermedia EXR6004 Manuel d'utilisateur télécharger pdf (Page 50)

3.8 Relay Setting

The I/O device must be installed to use this function.

1. The system automatically detects the I/O device that has connected with DVR system and display on

the drop-down list column.

2. Enter sensor name in Name column.

3. In the Content section, enter Description of relay.

4. In the test section, click Test to trigger relay. Red is high and Green is low.

5. Click OK to exit and accept the setting and Cancel to exit without saving the setting.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 116 117

Pas de commentaire

Avermedia EXR6004 Manuel d'utilisateur Page 50